Serving the Model A Restorer Since 1976

Original Parts

These are original parts. They can only be ordered on line ONLY not over the phone. Stock is very limited on all of these items. We try to keep this listing as up to date as possible, but we may sell out quickly.

Grid List

Set Descending Direction

1-20 of 64

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  1. ORIGINAL BRAKE & CLUTCH PEDAL SET NOV. 28 - MAY 30
    $125.00 /pair

    A nice set of pedals that are correct for Nov 28 - May 30. The grooves on the pedal heads are nice and crisp. This is the two piece forged style of pedals as described in the Judging Standards on page 7-2 & 7-3. There are no bushings included. Very nice with no pitting and very straight. You will be getting both pedals. Learn More
  2. 1928 CLUTCH HOUSING COVER

    1928 CLUTCH HOUSING COVER

    Part #: 11350-OP-01
    $19.95 /ea

    1928 CLUTCH HOUSING COVER Learn More
  3. USED THROW OUT BEARING FORK

    USED THROW OUT BEARING FORK

    Part #: 11421-OP-2
    $25.00 /ea

    This is the fork that is pined to the clutch shaft and is located inside the bell housing. The two ends of the fork tend to wear out over time as they rub against the ears on the throw out bearing hub. These are good usable parts that have been installed and might shown some wear but are still very usable. This is the style that does not use a key. Will need to be cleaned of dirt and grease, and repainted. Learn More
  4. 30-31 Stant Radiator Cap

    30-31 Stant Radiator Cap

    Part #: 11670-OP-1
    $75.00 /ea

    Out of stock

    30-31 Stant Radiator Cap Learn More
  5. 28-29 GAS TANK CLAMP W/O HARDWARE

    28-29 GAS TANK CLAMP W/O HARDWARE

    Part #: 12900-OP-01
    $1.75 /ea

    28-29 GAS TANK CLAMP W/O HARDWARE Learn More
  6. ORIGINAL 30-31 GAS TANK CALMP WITHOUT HARDWARE
    $1.50 /ea

    ORIGINAL 30-31 GAS TANK CALMP WITHOUT HARDWARE Learn More
  7. ORIGINAL THREADED GAS GAUGE SCREEN
    $50.00 /ea

    ORIGINAL THREADED GAS GAUGE SCREEN Learn More
  8. 30 - 31 ORIGINAL GAS CAP

    30 - 31 ORIGINAL GAS CAP

    Part #: 12950-OP-1
    $90.00 /ea

    Out of stock

    original 30-31 gas cap Learn More
  9. 30-31 Eaton Gas Cap

    30-31 Eaton Gas Cap

    Part #: 12950-OP-2
    $90.00 /ea

    Out of stock

    30-31 Eaton Gas Cap Learn More
  10. 30-31 EATON GAS CAP

    30-31 EATON GAS CAP

    Part #: 12950-OP-3
    $90.00 /ea

    30-31 Eaton Gas Cap Learn More
  11. 4 ORIGINAL FLOW TESTED ZENITH JETS
    $40.00 /set of 4

    Original Flow Tested Jets Learn More
  12. TYPE 2 GENERATOR PULLEY 12/27 - 1/29
    $15.00 /ea

    TYPE 2 GENERATOR PULLEY 12/27 - 1/29 Learn More
  13. KR WILSON FRONT HUB INNER RACE PULLER
    $175.00 /ea

    Here is a nice example of an original KR Wilson front hub inner race puller. This is the puller that will pull the larger inner face from the front hub. Over all condition is good the threads on both the large wing nut and the puller shaft look good and strong. There are the usual marks on the large wing nut where somebody in the past used a hammer to beat it, but that will not affect the usability of this tool. This will need to be sandblasted and repainted as there are several different colors of paint from flea market pricing. Learn More
  14. KR WILSON FRONT HUB OUTER RACE PULLER
    $175.00 /ea

    Here is a nice example of an original KR Wilson front hub outer race puller. This is the puller that will pull the smaller outer race from the front hub. Over all condition is good the threads on both the large wing nut and the puller shaft look good and strong. The threads have a tight spot on them but it is still usable. There are the usual marks on the large wing nut where somebody in the past used a hammer to beat it, but that will not affect the usability of this tool. This will need to be sandblasted and repainted as there are several different colors of paint from flea market pricing. Learn More
  15. 28-29 ORIGINAL HEADLIGHT BUCKETS

    28-29 ORIGINAL HEADLIGHT BUCKETS

    Part #: 17740-OP-01
    $300.00 /Pr

    A nice set of 28-29 headlight buckets. The buckets have been re-plated. The stamping is the most crisp and clear I have ever seen on the buckets. I tried to show that in detail. These buckets do not include reflectors, sockets, or lenses. The mounting stud and plate look like they were cad plated at sometime but it has an off color on it now. Learn More
  16. 1928 HEADLIGHT REFLECTORS

    1928 HEADLIGHT REFLECTORS

    Part #: 17940-OP-01
    $39.95 /pr

    Out of stock

    A nice pair of 1928 head light reflectors. Unlike the later style reflector these do not have the double lip to help hold the gasket in place. These are nice with no cracks, dings, or dents. They will need to be sent out to be plated, but are excellent candidate's for that process. Learn More
  17. RESTORED SCROLL STYLE OVAL DOME LIGHT
    $250.00 /ea

    A nicely restored scroll oval dome light. This has been re-wired, and nicely plated. Nice original milky glass with no cracks, or chips in it. Ready for installation. It is correct for the following applications: 1929 Fordor (60-A,B), 30-31 Deluxe Fordor (170-B), 29-31 Town Sedan, 1929-1930 Deluxe Delivery (130-A), 29 Town Car (140-A). Learn More
  18. 30-31 SIDE MOUNT SPARE TIRE CARRIER W/ REPRODUCTION PLATE
    $54.95 /ea

    30-31 SIDE MOUNT SPARE TIRE CARRIER W/ REPRODUCTION PLATE Learn More
  19. 30-31 RIGHT SIDE MOUNT SPARE TIRE CARRIER W/ REPRODUCTION PLATE
    $54.95 /ea

    30-31 RIGHT SIDE MOUNT SPARE TIRE CARRIER W/ REPRODUCTION PLATE Learn More
  20. DILL TIRE VALVE HARDWARE

    DILL TIRE VALVE HARDWARE

    Part #: 2240-OP-1
    $75.00 /set

    Here are four original Dill Tire Stems. They are correct for July 31 - end of production. All are marked Dill VS127A Made in the USA. Three of the four have TR83A on the bottom line. All four will need to be cleaned and plated. They come with the bridge washer that is stamped DILL 701. See the pictures for a better view of the overall condition. Learn More

Grid List

Set Descending Direction

1-20 of 64

Page:
  1. 1
  2. 2
  3. 3
  4. 4