7 TOOTH STEERING UPPER BUSHING WITH TWO MOUNTING SCREWS

Located at the top of the steering column to align the gas and spark rods and steering shaft. Before installing bushing into top of column be sure to slide the gas and spark rod through the bushing. Slide anti-rattle (4830) onto each rod 14 inches from handle end and extend them through their holes at the bottom of the steering column. Then tap the bushing in place. This will enable you to get the gas and spark rods through the end of the steering column much easier. Bushing is NOT pre-drilled and tapped for screws but it does include two 10/32 X 5/16"FHMS screws for the 1928 to May 1930 columns. Soak 2 3/4" wick in oil before installing.