| 12/24 CLINCH NUT |
 For Year(s): 12/24
These are D-Shaped brass nuts that are peened in place to hold a machine screw.
12/24 nuts for 1928?31 floorboard, 1930?31 gas tank, generator cutout wire clip on firewall and speedometer cable to firewall clip.
|
|
|
|
| 10/32 CLINCH NUT |
 For Year(s): 10/32
These are D-Shaped steel nuts that are peened in place to hold a machine screw.
10/32 nuts for firewall and 1928-29 sun visor, door garnish molding, door top frame.
|
|
|
|
| 1/4-20 CLINCH NUT |
 For Year(s): 1/4-20
These are D-Shaped steel nuts that are peened in place to hold a machine screw.
1/4-20 nuts for the dash rail.
|
|
|
|
| 3/8-24 CLINCH NUT |
 For Year(s): 3/8-24
These are D-Shaped steel nuts that are peened in place to hold a machine screw.
3/8-24 nuts for rear body sill to hold the spare tire carrier.
|
|
|
|
| 5/16-24 CLINCH NUT |
 For Year(s): 5/16-24
These are D-Shaped steel nuts that are peened in place to hold a machine screw.
5/16-24 nuts for rear fender brace to wheel housing on sedans and phaetons, also tail light bracket nuts on body for 1928 Phaeton, Tudor & Coupe.
|
|
|
|
| 7/16-20 CLINCH NUT |
 For Year(s): 7/16-20
These are D-Shaped steel nuts that are peened in place to hold a machine screw.
7/16-20 nuts for rear spare tire carrier for 28-29 Fordor Briggs with 4 bolt pattern and top support bar on 4 door Phaeton.
|
|
|
|
| SAFETY WIRE |
 For Year(s): 28-31
Soft, annealed .040" O.D. Stainless wire used for the bolt heads that are cross drilled as on the differential, torque tube, flywheel and rear engine mount bolts.
The following list are the areas where the safety wire is used with the part # of the bolt set and length of wire used:
A4505 Torque Tube-2ft.
A5097 Rear Motor Mount-2ft.
A6376X Flywheel to crank-2ft.
A6395A Flywheel to Block-2ft.
A7086X Trans Rear Bushing Retainer-2ft.
|
|
|
|
| ZINC COTTER PIN SET |
 For Year(s): 28-31
160 zinc pieces for complete car. Bend long side of pin over end of bolt, the other side down the side of the castle nut. List of each location included.
|
|
|
|
| STAINLESS COTTER PIN SET |
 For Year(s): 28-31
160 stainless steel pieces for complete car. Bend long side of pin over end of bolt, the other side down the side of the castle nut. List of each location included.
|
|
|
|
| STEEL BODY NAILS |
 For Year(s): 28-31
Original small round head (.165 diameter round head) 11/16" long, used at door post and other places to secure sheet metal to wood. 100 steel nails per set.
|
|
|
|
View Cart
Recover Cart