| FORD ENGINE GREEN ENAMEL PAINT - PINT |
 For Year(s): 28-41
For spray gun or brush. Clean bare engine with Metal-Prep from PPG Auto Paint - Apply green paint, 2 coats are needed. No primer is needed. Quality paint from Bill Hirsh.
|
|
|
|
| FORD ENGINE GREEN SPRAY PAINT |
 For Year(s): 28-41
11 oz. spray can.
|
|
|
|
| PAPER ENGINE GASKET WITH MODERN HEAD GASKET |
 For Year(s): 28-31
A complete engine gasket set with the following:
MODERN Head gasket
Oil pan ‑ 2 end seals and rubber/cork gasket that fits)
Valve cover ‑ rubber/cork
Oil return pipe ‑ 2 cork,
Oil return pipe-2 cop.washers
Front timing gear‑teflon coated
Water pump ‑ paper,
Water inlet ‑ paper,
Water outlet ‑ paper,
Exhaust manifold ‑ composite material with metal shield
Timing cover ‑ paper
Front timing cover ‑ paper
Carb. to manifold - paper
Oil pump-top & bottom paper
Oil pan drain plug ‑ copper
Flywheel Housing ‑ paper
Carb bowl - paper
Sediment bowl - cork
|
|
|
|
| PAPER ENGINE GASKET SET WITH COPPER HEAD GASKET |
 For Year(s): 28-31
A complete engine gasket set with the following:
COPPER Head gasket
Oil pan ‑ 2 end seals and rubber/cork gasket that fits)
Valve cover ‑ rubber/cork
Oil return pipe ‑ 2 cork,
Oil return pipe-2 cop.washers
Front timing gear‑teflon coated
Water pump ‑ paper,
Water inlet ‑ paper,
Water outlet ‑ paper,
Exhaust manifold ‑ composite material with metal shield
Timing cover ‑ paper
Front timing cover ‑ paper
Carb. to manifold - paper
Oil pump-top & bottom paper
Oil pan drain plug ‑ copper
Flywheel Housing ‑ paper
Carb bowl - paper
Sediment bowl - cork
|
|
|
|
| COPPER ENGINE GASKET SET WITH COPPER HEAD GASKET |
 For Year(s): 28-31
Same gasket applications as (# 7760) except the following are copper gaskets as original with WHITE material in the middle. Water Inlet, Water Outlet, Exhaust Manifold, Carburetor, and Oil Drain Plug.
|
|
|
|
| COPPER ENGINE GASKET SET WITH MODERN HEAD GASKET |
 For Year(s): 28-31
Same gasket applications as (# 7770) except the following are copper gaskets as original with WHITE material in the middle. Water Inlet, Water Outlet, Exhaust Manifold, Carburetor, and Oil Drain Plug.
|
|
|
|
| COPPER ENGINE GASKET SET WITH COPPER HEAD GASKET FOR 1931 |
 For Year(s): 1931
The manifold gasket was changed in May 1931 till end to the slide in style. Same gasket applications as (# 7760) except the following are copper gaskets as original with WHITE material in the middle. Water Inlet, Water Outlet, Exhaust Manifold, Carburetor, and Oil Drain Plug.
|
|
|
|
| COPPER ENGINE GASKET SET WITH MODERN HEAD GASKET FOR 1931 |
 For Year(s): 1931
The manifold gasket was changed in May 1931 till end to the slide in style. Same gasket applications as (# 7800) except the following are copper gaskets as original with WHITE material in the middle. Water Inlet, Water Outlet, Exhaust Manifold, Carburetor, and Oil Drain Plug.
|
|
|
|
| HEAD GASKET & GAS LINE FITTING SEALER |
 For Year(s): 28-31
An excellent adhesive sealant with a high tack that never becomes hard. It will not dissolve in gasoline, oil or antifreeze. Lid has a brush. Brush both sides of head gasket (not to be used on the modern style) with sealer. Then, brush a coating around the edge of each hole. If installing new engine studs, apply a coating on the threads before installing them into the block. Can also be used on the valve cover and paper oil pan gasksts just coat both sides. Let it tack up and install.This sealer can be used on all gas line fittings and gas gauge nuts to make a leak proof seal. Used on the copper gasket to make a better seal. Not needed on the modern head gasket. 4 oz. can by Permatex.
|
|
|
|
| SIDE TIMING COVER GASKET |
 For Year(s): 28-31
Paper type gasket.
|
|
|
|
View Cart
Recover Cart