| FRONT SPRING SHACKLES |
 For Year(s): 28-31
One for each end of the front spring. Includes grease fittings, bushings, two bars, but not the original shape, and castle nuts. Fits 1928-31. Tighten castle nuts tight, then back off half turn to allow spring to pivot. Foreign, but good.
|
|
|
|
| REAR SPRING SHACKLES -OR AA FRONT SHACKLES |
 For Year(s): 28-31
One for each end of the rear spring. Includes grease fittings, bushings, two bars, but not the original shape, and castle nuts. Fits 1928-31. Tighten castle nuts tight, then back off half turn to allow spring to pivot. Foreign, but good.
|
|
|
|
| FRONT SPRING PERCH OR SPRING SHACKLE BUSHING |
 For Year(s): 28-31
If your spring shackles are good, then replace all 4 bushings. These are pre-reamed at the factory.
|
|
|
|
| DRILL BIT TO REAM SPRING SHACKEL BUSHINGS |
 For Year(s): 28-31
This is a 14.5 millimeter drill bit with a 1/2" shank.
|
|
|
|
| SPRING & PERCH BUSHING DRIVER |
 For Year(s): 28-31
Use this handy tool to help remove and install new bushing in the following parts:
Front & Rear Spring Bushings
Front & Rear Spring Perchs Bushings
Rear Brake and Camshaft Bushings
|
|
|
|
| SPRING SHACKLE BAR |
 For Year(s): 28-31
This is the original style bar with each corner diagonally cut. The repro shackle kits contain incorrect style bars. Need 4 per car.
|
|
|
|
| 10 LEAF FRONT SPRING |
 For Year(s): 28-31
New spring. Ten leaves. Tapered ends. TO FIT IN THE CROSS MEMBER, THE TOP LEAF MUST HAVE THE TOP EDGES GROUND ON A TAPER. To disassemble, use two 'C' clamps to hold leaves together. Remove shipping center pin. Slowly release 'C' clamps. Apply chassis grease to each leaf - Use 'C' clamps to compress leaves together. Install correct square headed bolt, cut off extra length, then use a hammer to peen over bolt on nut. Includes spring clamps. Most front springs are fatigued from years of engine weight. See drawing for correct dimensions. Bushings and clamps are included.
|
|
|
|
| GRAPHITE LUBE |
 For Year(s): ALL
GRAPHITE LUBE - Spray this on the bottom of each leaf to help reduce the squeaks of the spring. Spring must be dissembled and painted before you apply this product.
|
|
|
|
| SPRING COVERS |
 For Year(s): 28-31
Cushioned material with black vinyl covering. Set includes a pair for the front and rear springs.
|
|
|
|
| FRONT SPRING SPREADER |
 For Year(s): 28-31
The BEST made front spring spreader we've used. From the same manufacturer of the high quality rear spring spreader. Can be used for both Model A & T FORD's.
|
|
|
|
View Cart
Recover Cart