| ORIGINAL STEEL MUFFLER |
 For Year(s): 28-31
This muffler is made from the seven FORD factory blue prints, the same as the 100% stainless muffler except out of cold roll STEEL for judging purposes. Original sound and perfect fit to manifold. Shipped in a protective box. This muffler is painted flat black. Shipped bubble wrapped in a special protective box. Made by Aries
|
|
|
|
| STAINLESS STEEL MUFFLER |
 For Year(s): 28-31
Excellent copy of the original muffler using seven factory blue prints to duplicate the muffler FORD made. Internal pipe has 172 1/4" porting holes and 3 baffles. Exhaust passes from internal pipe to large muffler area in three sections, which eliminates engine back pressure, which affects engine performance. This correct baffling system creates that original muffler sound. The flange at neck is correct for a perfect fit to the manifold. Best of all, 100% of the muffler is made from STAINLESS STEEL. Years after use, you can slide under your car and the muffler system will still look and sound like new, and no rust will fall in your eyes. Shipped bubble wrapped in a special protective box. Made by Aries.
|
|
|
|
| BLACK HEAT RESISTANT SPRAY PAINT |
 Resists heat up to 1500 degrees for manifold and mufflers. Spray on clean metal, no primer needed. Spray only enough to cover metal, do not over-paint. 11 oz can.
|
|
|
|
| GRAY HEAT RESISTANT SPRAY PAINT |
 Resists heat up to 1500 degrees for manifold and mufflers. Spray on clean metal, no primer needed. Spray only enough to cover metal, do not over-paint. 11 oz can.
|
|
|
|
| 28 - AUG 29 MUFFLER CLAMP |
 For Year(s): 28-29
Holds the muffler to the manifold. ORIGINAL Thick Head Raven bolts with no marks on the head and 3/8" tall brass nuts. Other vendors use cheap hardware bolts not the origianl style. Made from strong flexable, malleable iron, will not break. Includes original mold letter and number. Letter side is down when installed.
|
|
|
|
| AUG 29 - 31 MUFFLER CLAMP AUG |
 For Year(s): 29-34
Holds the muffler to the manifold. Two raven 3/8-16 x 1 15/16 bolts with original thick head and no marks with coarse-threaded brass nuts Used Aug. 1929 to end of production. The brass nuts included are the original 3/8" tall nuts. Bolts and nuts are included. Made from strong flexable, malleable iron, will not break. Includes original mold letter and number. Letter side is down when installed.
|
|
|
|
| 28 - AUG 29 MUFFLER CLAMP BAKED CAST IRON FINISH |
 For Year(s): 28-29
This is the same clamp as (# 6970) but with a baked on gray cast iron finish which will take up to 1800 degrees to prevent rusting. The finish looks like raw cast iron for the original look. 1928-Aug.29.
|
|
|
|
| AUG 29- 31 MUFFLER CLAMP BAKED CAST IRON FINISH |
 For Year(s): 29-34
This is the same clamp as (# 6990) but with a baked on gray cast iron finish which will take up to 1800 degrees to prevent rusting. The finish looks like raw cast iron for the original look. Aug. 1929-31
|
|
|
|
| 28 - AUG 29 MUFFLER CLAMP BOLTS & NUTS |
 For Year(s): 28-29
Two raven 3/8-24 x 1 15/16 bolts with brass nuts for 1928 to Aug, 1929. The brass nuts included are the original 3/8" tall nuts. The bolts have the original thick head with no head markings.
|
|
|
|
| AUG 29 - 31 MUFFLER CLAMP BOLTS & NUTS |
 For Year(s): 29-34
Two raven 3/8-16 x 1 15/16 bolts and brass nuts used Aug. 1929 till end. The brass nuts included are the original 3/8" tall nuts. The bolts have the original thick head with no head markings.
|
|
|
|
View Cart
Recover Cart